YOKOGAWA YS80 Series Rack Instruments

• YOKOGAWA STED mV, Temperature and Potentiometer/Voltage Converter

Converters that convert the input signals from DC potential differences (mV DC), thermocouples, RTDs and slide rheostats, to isolated 1 to 5 V DC  and 4 to 20 mA DC signals, and output them.

•  YOKOGAWA SKYD Alarm Unit
  Alarm units enabling absolute value alarms or deviation alarms.

•  YOKOGAWA SALD mV and Temperature Alarm Unit
  Alarm units that use DC potential difference (mV DC), thermocouples or RTDs as input signals.

•  YOKOGAWA SDAU Digital Alarm Unit
  Digital alarm units that receive 2 inputs and can output absolute value alarms or deviation alarms.

•  YOKOGAWA SIND Integrator
  Integrators that receive 1 to 5 V DC input signals, and output pulse signals.

•  YOKOGAWA SISD Isolator
  Isolators that receive 1 to 5 V DC input signals, and output 1 to 5 V DC and 4 to 20 mA DC signals isolated from the input and power supply.

•  YOKOGAWA SDBT Distributor
  Distributors that can be connected to a single 2-wire transmitter that outputs 4 to 20 mA DC signals.

•  YOKOGAWA SDBS Distributor
  Distributors that can be connected to four 2-wire transmitters that output 4 to 20 mA DC signals. Inputs and outputs are not isolated. Each loop is isolated.

•  YOKOGAWA SDBU Distributor
  Distributors that can be connected to 2-wire transmitters that output 10 to 50 mA DC or 4 to 20 mA DC signals. Types that connect to a single transmitter and types that connect to 4 transmitters are available.

•  YOKOGAWA SPLR Programmable Computing Unit
  Computing units that come with a wide range of computing capabilities, and enable user programming.

•  YOKOGAWA PTED EMF- and RTD-to-Pneumatic Converter
  Converters that convert mV DC input, thermocouple input, RTD input or 1 to 5 V DC input, to 20 to 100 kPa pneumatic output signals.

Note: The model PTED-1 to -3 have been discontinued, and the model PTED-5 (1 to 5 V input) is only available at this moment.