YOKOGAWA EB401 ER Bus Interface Master Module, Used in FIO System for AFV10□  ((dual-redundant))

(EB401 Card, YOKOGAWA EB401 Card, YOKOGAWA EB401 Module)

The FIO is an I/O system that is connected to a control station via ESB or ER bus. FIO consists of two types of node units on two types of buses.

The node units on an ESB bus referred to as local nodes, and those on an ER bus referred to as remote nodes. Each of these nodes is composed of a base unit, power supply module, bus interface module, and input/output modules. Power supply module, bus interface module, and input/output modules can be configured redundantly.

When using an EB401 as a single, install it in an odd slot and leave the immediate right slot empty.

We have good price for following 100% Original YOKOGAWA products:

DCS Parts:  Most of DCS and Parts;

1)    CENTUM VP and Parts;

2)    Control Network Vnet / IP and Parts;

3)    CENTUM CS 3000 R3 and Parts;

4)    CENTUM CS and Parts.

Field Instruments:

1)    EJA Series (Differential) Pressure Transmitters；

2)    EJX Series (Differential) Pressure Transmitters；

3)    CV Valve Manifolds;

4)    YTA Series Temperature Transmitters;

5)    Flowmeters(AXF,AXR,AXW,AE,CA,DY,RCC,RAMC);

6)    P10 Pneumatic Pressure/ Differential Pressure Transmitters;

7)    Other Field Instruments.

Recorders:

1)    Paperless Recorder (CX1000,CX2000,DX1000,DX2000,FX1000,MV1000,MV2000);

2)    Strip Chart Recorder (µR10000,µR20000,DR130,DR230,DR240,LR).

Other YOKOGAWA Products:

We provide many more YOKOGAWA products, contact us for details!